Features
LOW RPM/SECURITY MODE
A small remote transmitter allows you to reduce top speed
and RPMs for better fuel efficiency and disable the ignition
to prevent an unauthorized startup.
FUEL CONSUMPTION
The FX Cruiser High Output offers the best fuel economy
in its class (5 gallons per hour less usage than comparable
models) and a fuel consumption meter that allows you to
keep track of your gas mileage while riding.
REBOARDING STEP
A retractable reboarding step makes it easy to climb back
on the WaveRunner after taking a break for a quick swim
or snorkeling session.
ADJUSTABLE STEERING
The driver can optimize leverage by adjusting the steering
column to his or her preferred riding position.
The Powerplant
• The FX Cruiser® High
Output is powered by a Yamaha High Output MR-1™
engine. This 1052cc four cylinder, four-stroke
Yamaha marine engine delivers more power in a lighter
package than any other full-size, four-stroke normally-aspirated
watercraft in the industry.
• Electronic Fuel Injection (EFI): Four
individually adjustable throttle bodies, throttle position
sensor (TPS) and intake air pressure and air temperature
sensors supply the optimum air/fuel mixture. The results
are a smooth, high power output with low fuel consumption
and low exhaust emissions.
• Specially Designed, One-piece Cylinder
and Crankcase Assembly: Provides tremendous engine
rigidity that's lighter and stiffer than two-piece designs.
• Slant Detection Switch: Electronic
switch stops engine and oil pumps immediately if watercraft
becomes overturned, protecting motor from unwanted water
ingestion.
• High Volume Intake Box: With
water repellent air filter and flame arrestors.
• Dry Sump Lubrication: Uses two
engine oil pumps to deliver lubricated oil to each moving
part with water-jacketed sump and oil backflow protection.
• Yamaha Engine Management System (Y.E.M.S.):
An integrated, computerized management system that controls
and adjusts such functions as ignition timing, fuel injection
mapping, engine diagnostics and off throttle steering.
The OTS function of Y.E.M.S. activates when the operator
releases the throttle lever and attempts to steer the
watercraft.
This assists the operator in turning while the watercraft
is decelerating.
• Independent Water-jacketed Exhaust Manifolds
with Collector: Achieves high power while keeping
noise and exhaust heat under control.
• Thermostatic and Pressure Controlled Cooling
System: Water flow through the engine is controlled
by a thermostat and pressure system and is maintained
by a pressure control valve.
• Corrosion Protection System:
Sacrificial zinc anodes protect the engine from harmful
galvanic corrosion. Stainless steel fasteners (nuts, bolts,
hardware) provide a long service life. Cylinders, cases
and heads are all treated with a durable oxide coating
to form a barrier between corrosion and expensive engine
parts.
• Electronically Controlled, Variable Ignition
Timing: For exact ignition advance control at
all throttle positions and RPMs.
• Direct injection: For more efficient
combustion.
The Jet Pump Propulsion System
• The FX Cruiser High Output's
155mm hyper-flow jet pump propulsion system with
three-blade stainless steel impeller is designed to maximize
water flow for high performance. The FX pump configuration
provides excellent hook-up and smooth acceleration.
• Reverse: Allows the watercraft
to be backed up off a trailer or out of tight spots where
you cannot turn around easily.
• Quick Shift Trim System (Q.S.T.S.):
Mechanically operated, this system offers instant change
in the attitude of the watercraft while underway allowing
for tighter turns or quicker acceleration on plane, as
the rider prefers. Q.S.T.S. offers 24 degrees of total
trim range.
• Stainless Steel Impeller Housing Liner:
For high durability, the liner maintains accurate
clearance tolerances between the impeller and the housing.
• High Flow Intake Duct and Grate:
The dynamic shape of these items directs water flow into
the pump for better thrust, performance and hook up.
• Pumps are Manufactured with YDC30:
A combination of zinc and copper alloys, developed by
Yamaha marine engineers, that offers excellent corrosion
protection.
The Ultra-Lightweight, High Strength
Hull and Deck
• The FX High Output was
specifically designed to be ultra-light. Built
from a high-tech SMC material, the FX Cruiser High Output’s
hull is not only the best-handling hull in its class,
but its lighter weight adds to the FX Cruiser High Output’s
best-in-class power-to-weight ratio.
• Progressive, Stepper Draft V-Hull with
Integrated Bow Spray Guard: Provides excellent
maneuverability, handling and comfort.
• Sponson Design: Provides added
straight-line comfort and an improved two and three-up
riding experience.
Additional Features:
• Yamaha Cruiser Seat:
Yamaha’s innovative Cruiser seat provides excellent
comfort for the passenger and driver.
• Five-step Adjustable Tilt Steering System:
Allows the rider to adjust the steering column
angle from 55 degrees to 35 degrees.
• Multi-function Electronic Information
Center: Provides the operator a quick read on
speed, RPM, fuel level, low fuel warning, low oil pressure
warning, battery voltage, overheat warning, hour meter,
check engine light with self-diagnostic function and the
industry's only audible warning system.
• Industry's First Remote Controlled Transmitter:
With the touch of a button on Yamaha’s
innovative remote controlled transmitter, you can activate
and deactivate the FX Cruiser High Output's digital security
system and all-new Low RPM Mode from up to 30 feet away.
• Foot Chocks - The foot chocks,
along with the Cruiser seat and handlebars, create a three-point
contact system that reduces tension on the driver’s
arms and legs.
• Low RPM Mode™: Also with
the touch a button on the remote transmitter, the top
speed of the FX Cruiser High Output is reduced by nearly
30 percent.
• Yamaha Security System: This
security system that can be activated with the touch of
a button ensures that no one starts the FX Cruiser High
Output without your permission.
• 26 Gallons of Total Storage: Includes a large
19.8-gallon cooler, rear storage tub and glove box.
• Glove Box with Self-draining Beverage
Holders: The industry's first self-draining beverage
holders.
• Extra Large Boarding Platform: Provides
a stable platform for re-boarding.
• Dual Mirrors: Automotive style
and convenience.
• Finger Throttle Lever: Provides
added comfort while reducing hand fatigue.
• Yamaha's Trademarked Visibility Spout®:
A waterspout from the rear of the craft that
improves the watercraft’s conspicuity.
Specifications
